03 Reinigung

Reinigungsmaterial, Reinigungsgranulat

  • 41612N SLIDE Entformhilfe ECO – Silikonhaltig

    0 out of 5

    Econo Enformungshilfsmittel Silikonhaltig (41612N)

    • Hilft bei der Entformung
    • Lebensmitteltauglich
    • Rückstandsfrei
    • Geruchlos

    Max. Einsatztemperatur : +320°C
    Füllgewicht : 326 g

    CHF 6.20
  • 42612 SLIDE Entformungshilfe Universal

    0 out of 5

    SLIDE 42612H Entformungshilfsmittel universal

    Universal mold release agent No. 42612H

    • No chlorinated solvents
    • Non-silicone paintable
    • Food-approved lubricant(+++++)
    • Use where parts must be painted, hot-stamped or metalized
    • Colorless
    • Maximum operating temperature: 600ºF

    Universal is just that, a broad universal release that can be used on all thermoplastics, even more sensitive plastics. Approved as a direct food additive (+++++), Universal also meets certain requirements for molding medical products – contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

    (+++++) Meets or exceeds FDA and USP/NF requirements for 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680

    NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

    Démoulant universel
    Agent sans silicone, peut être peint, métallisé ou sérigraphié. Exempt de produits chimiques nuisibles à la couche d’ozone. Lubrifiant homologué FDA.
    Biodégradable et sans odeur. Peut être utilisé avec la plupart des thermoplastiques. Il permet également les soudures HF.
    Température maxi de service : + 320°C
    Contenance : 340 gr.

    CHF 10.30
  • 42810R SLIDE Schneller Konservierer ROT

    0 out of 5

    SLIDE 42810 Schneller Konservierer

    Quick Rust Preventive (Quick RP) with red indicator dye No. 42810R

    • No chlorinated solvents
    • Ultra-dry formula
    • 2-year protection, protects up to two years under normal indoor storage conditions.
    • Non-penetrating
    • Will not bleed out and mark parts
    • Neutralizes fingerprints
    • Non-silicone, non-wax formulation
    • Self-cleaning in start-up

    Slide Quick RP employs a combination of fast evaporating solvents and oils to set up quickly on your mold surfaces, providing immediate protection against moisture and light acids. This unique “dry” package makes clean-up quick and easy when the mold is put back into production, saving time and money .

    CHF 6.80
  • 42910 SLIDE Konservierungsspray trocken

    0 out of 5

    Mold Shield trockene Rostvorsorge Nr. 42910

    • Keine chlorierten Lösungsmittel
    • Neue Ultra-Trockene Formel
    • 2-jahres Schutz, Schützt unter normalen Bedingungen in Innenräumen
    • Kein Eindringen in Oberflächen
    • Wird nicht ausbluten oder Marken auf Teilen hinterlassen
    • Neutralisiert Fingerabdrücke
    • Ohne Silikon, wachsfreie Formulierung
    • Selbstreinigend beim Anfahren der Produktion
    • Hält Kondensation fern

    Mold Shild hat eine einzigartige, extra trockene Spray-Applikation. Penetriert durch den trockenen Nebel nicht die Auswerferbohrungen, Schieber, Kulissen und andere Werkzeugteile. Dieser spezielle Trockennebel lässt keine Marken auf den Teilen zurück, wenn die Werkzeuge wieder zurück in der Produktion angefahren werden.

    Video zur Anwendung unter http://www.slideproducts.com/videos/rust.html

    CHF 5.75
  • 43911 SLIDE Hochtemperaturfett

    0 out of 5

    SLIDE 43911 Hochtemperaturfett

    Super Grease lubricant aerosol No. 43911

    • No chlorinated solvents
    • NSF-H1 ( download NSF approval letter )
    • NLGI #2 high temperature range grease
    • Colorless & odorless, excellent dielectric strength
    • Contains PTFE, no silicones
    • Will not bleed out; paintable
    • Operating Temperatures.: -45F to +650F*
    *Intermittent
    • Reviewed and Approved by Health Canada ( download Health Canada approval letter )

    Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixotropic properties provide excellent mechanical stability when sudden temperature changes occur. A clear, clean, non-yellowing grease, Super Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also repels water and prevents corrosion.

    Graisse haute température – GAmmE ECONOmIqUE
    Graisse spécialement étudiée pour les hautes
    températures d’utilisation. Exempt de produits chimiques
    nuisibles à la couche d’ozone, incolore et inodore. Dotée
    de propriétés diélectriques excellentes, elle contient du
    Téflon. Ne gèle pas, ne s’encrasse pas. Sans silicone,
    compatible avec d’autres lubrifiants. Ne coule pas,
    peut être peinte ; graisse claire non jaunissante avec
    d’excellentes propriétés thixotropiques qui lui fournissent
    une stabilité mécanique exceptionnelle lors de brusques
    changements de température.
    Graisse idéale pour les moules d’injection et outillages
    destinés à des applications médicales ou alimentaires.
    Contenance : 445 gr.

    CHF 10.95
  • 45712N SLIDE Pure Eze Entformungshilfe – Ohne Silikon

    0 out of 5

    SLIDE Pure Eze Enformungshilfsmittel ohne Silikon Nr. 45712N
    Diese Produkt wurde entwickelt, um eine einfache Entformung für viele Kunststoffe zu unterstützen. Es eignet sich bei Polyolefinen, Polykarbonaten, Kautschuk und gewissen epoxibasierten Materialien. Es ist Ölbasiert, neutralem Weissöl, es entält kein Lecitin.
    Es ist lebensmitteltauglich und auch für Anwendungen in der Medizintechnik geeignet.
    Es hinterlässt keinen Farbstich auf den Teilen und verändert auch seine Farbe nach langer Zeit nicht.

    Anwendungstemperatur max.: + 315°C
    Füllmenge: 326 g

    The Slide Pure Eze mold release agent is easy to use. Main ingredient is comprised of hydrocarbon. Is rated as Food Grade. Can be used to a maximum temperature of +600 F. In addition to the other features this product meets the following standards: 21 CFR 172.878, 21 CFR 178.3620, 21 CFR 182.4521, 21 CFR 573.680, UL Recognized. This mold release agent is packaged 12 per case.
    Specifications

    Brand: Slide
    Trade Name: Pure Eze
    Chemical Base: Hydrocarbon
    Grade: Food Grade
    Paintable: Paintable
    Package Type: Aerosol Can
    Maximum Operating Temperature: +600 °F
    Color: White
    Standards Met: 21 CFR 172.878; 21 CFR 178.3620; 21 CFR 182.4521; 21 CFR 573.680; UL Recognized
    Volatile Organic Compounds (VOCs): 97 %
    Storage Condition: Store in a Cool, Dark, Well-Ventilated Area
    Package Quantity: 12 per case

    CHF 7.05
  • 45920 SLIDE Entfetter 3

    0 out of 5

    Econo Spray Mold Cleaner (45612) Reinigungsspray

    • Reinigt die Oberflächen von Werkzeugflächen Rückstandsfrei

    CHF 5.30
  • 6110005500 ambersil Formel 6 Entformungshilfe silikon

    0 out of 5

    Démoulant très puissant à film humide, sans silicone. Très efficace avec la plupart des thermoplastiques et caoutchoucs. Sa formulation spéciale n’interfère pas avec les opérations de post moulage (peinture métallisation,…). Améliore l’état de surface et ne provoque pas d’accumulation dans l’empreinte. Très efficace jusqu’à une température de 170°C. Contenance : 400 ml. Existe également en 25 et 200 l.

    CHF 6.66
  • 6120001500 Ambersil Formula 7 Entformungshilfe silikonfrei

    0 out of 5

    Démoulant très puissant à film humide, sans silicone. Très efficace avec la plupart des thermoplastiques et caoutchoucs. Sa formulation spéciale n’interfère pas avec les opérations de post moulage (peinture métallisation,…). Améliore l’état de surface et ne provoque pas d’accumulation dans l’empreinte. Très efficace jusqu’à une température de 170°C. Contenance : 400 ml. Existe également en 25 et 200 l.

    CHF 6.25
  • 6120002500 ambersil Formula 5 Entformungshilfe silikonfrei

    0 out of 5

    ambersil Formel 5 Entformungshilfe silikonfrei, mittlere Stärke, trocken

    Basierend auf einer Wachs/Estermischung, gewährleister es eine exzellente Entformungscharakteristik für alle Typen von thermoplastischen Werkstoffen, einigen Duroplasten und vielen Gummitypen. Ergibt einen trockenen, lichtechten Film für das Entformen von feinen Details in Bauteilen aus Thermoplast oder Gummi. Ergibt einen attraktiven, matten Glanz und baut nicht auf im Werkzeug. Hilft, den Oberflächenfinish zu verbessern und Ausschussraten zu vermindern beim Spritzgiessen und Thermoformen. Unterstützt die schnelle und effektive Freigabe von Bauteilen aus Alabaster, GRP und Silikonelastomeren in anderen Formungsprozessen.
    ambersil Formel 5 kann auch in anderen Prozessen, wie in der Textilverarbeitung, beim Nähen, Schaumformen, Bedrucken und in der Schuhproduktion.
    Der Spray ist farblos mit dem typischen Kohlenwasserstoffgeruch und löslich in den meisten organischen Lösungsmitteln. Unlöslich in Wasser.

    Inhalt: 400 ml.

    Formula 5
    Agent démoulant puissant sans silicone.
    Film sec.
    Démoulant à film sec sans silicone pour usage léger. Très efficace avec la plupart des thermoplastiques, certains thermodurs, caoutchoucs thermo-plastiques ainsi que bien des caoutchoucs. Sa formulation spéciale n’interfère pas avec les opérations de post moulage (peinture, métallisation,…).
    Améliore l’état de surface et ne provoque pas d’accumulation dans l’empreinte.
    Très efficace jusqu’à une température de 150°C.
    Contenance : 400 ml.

    plastic and rubber parts in injection moulding, vacuum forming and ensures quick and effective release of, Plaster of Paris, GRP and silicone rubber in other forming processes. Produces an attractive matte finish and will not build up in the mould. Helps to improve surface finish, reduce rejects and increase production. Also useful as an anti-stick agent in the textile, sewing, foam converting, printing and shoe industries. It is in the form of clear colourless liquid with characteristic hydrocarbon odour and soluble in most organic solvents, insoluble in water.

    0.682 Specific gravity
    3.5bar Pressure
    1g/s Discharge rate
    Up to 150°C Operating temperature range
    63°C Boiling point
    -26°C Flash point

    The 6120005000 is a Mould Protection features temporarily conservation of metal parts during storage.

    Solvent odour
    Protects metals and alloys
    Displaces and seals out water and moisture
    Safe on all metal surfaces, does not stain
    Safe on most rubbers, plastics and coatings
    Test on sensitive or stressed materials before use

    Spray de protection anti corrosion
    Agent de protection en spray contre la corrosion des pièces métalliques. Ne contient pas de silicone. Forme un film visible de couleur jaune qui assure une protection totale et longue durée. Film non gras qui ne durcit pas. Auto nettoyant au démarrage de la production. Résiste aux manipulations et à l’acidité des marques de doigts.
    Contenance : 400 ml.

    CHF 9.40
  • 6120005000 ambersil Korrosionsschutzspray

    0 out of 5

    ambersil Korrosionsschutzspray

    Besonders geeignet um auf metallischen Oberflächen Korrosion zu vermeiden. Der Spray enthält kein Silikon. Er bildet einen sichtbaren, gelbstichigen Film, der einen langanhaltenden Schutz garantiert.
    Der Film ist nicht fetthaltig und verschwindet selbst beim Anfahren der Produktion in Spritzgussformen. Verbleibt auf der Oberfläche, auch wenn diese mit der fingerschweiss-behafteten Fingern berührt werden.
    Inhalt: 400 ml.

    The 6120005000 is a Mould Protection features temporarily conservation of metal parts during storage.

    Solvent odour
    Protects metals and alloys
    Displaces and seals out water and moisture
    Safe on all metal surfaces, does not stain
    Safe on most rubbers, plastics and coatings
    Test on sensitive or stressed materials before use

    Spray de protection anti corrosion
    Agent de protection en spray contre la corrosion des pièces métalliques. Ne contient pas de silicone. Forme un film visible de couleur jaune qui assure une protection totale et longue durée. Film non gras qui ne durcit pas. Auto nettoyant au démarrage de la production. Résiste aux manipulations et à l’acidité des marques de doigts.
    Contenance : 400 ml.

    CHF 7.25
  • 6120005500 ambersil Korrosionsschutzspray

    0 out of 5

    ambersil 6120005500 Korrosionsschutzspray

    Besonders geeignet um auf metallischen Oberflächen Korrosion zu vermeiden. Der Spray enthält kein Silikon. Er bildet einen trockenen, unsichtbaren Film, der die Oberfläche nicht penetriert und einen langanhaltenden Schutz garantiert.
    Der Film ist nicht fetthaltig und verschwindet selbst beim Anfahren der Produktion in Spritzgussformen. Verbleibt auf der Oberfläche, auch wenn diese mit der fingerschweiss-behafteten Fingern berührt werden.
    Inhalt: 400 ml.

    Spray de protection anti corrosion incolore
    Agent de protection en spray contre la corrosion des
    moules, filières,… produisant un agent sans silicone
    incolore. Ne laisse aucune trace sur les pièces. Le film
    protecteur, sec, ne pénètre pas dans l’outillage. Auto
    nettoyant au démarrage de la production. Résiste aux
    manipulations et à l’acidité des marques de doigts.
    Contenance : 400 ml.

    CHF 9.20